INSTALLATION OF FULL-DOOR SEAL KIT
Note:
The Side Rubber Seals and Air Foils must be installed on the rear corner posts of
vehicle before the Top Seal and Air Foil is installed.
1. With the Platform in the stored position, find the location of the Top Double Rail according to
Figure 1. Measure the distance from the vehicle floor to the top of the Top Double Rail and
record the measurement as the ‘Y’ Dimension. Cut the Side Double Rails, Side Rubber Seals,
and Side Air Foils to match the ‘Y’ Dimension.
2. Find the location of the Side Double Rails on the vehicle corner posts. Measure the distance from
the outer edge of one Side Double Rail to the outer edge of the other Side Double Rail and record
this measurement as the ‘X’ Dimension. Cut the Top Double Rail, Top Rubber Seal, and Top Air
Foil to match the ‘X’ Dimension. Refer to Step 4 for further instructions on how to position the
Side Double Rails.
Top of Rear Opening
Rubber Sill & Rail
Truck Floor
Top Double Rail
Fig.1
Platform
Y
4
9
