18
Cable lead-through
In order to be able to install/remove/adjust the cables in the
cable grommet, its protective cover must be removed and
the five screws loosened.
Remove the protective cover fastened with three screws
on the cable grommet.
Loosen the five screws on the cable grommet. Cables
can now be installed/removed/adjusted in the grommet.
On installation, the cable must be installed together with
existing cabling with cable ties. Ensure the length of the
cable is sufficient for moving the control card. The outer
sheathing on cable connected to the control card must
be stripped 10 inches.
GR03025
Once all the cables are in their appropriate places in the
grommet, retighten the five screws.
Install the protective cover on the cable grommet with
the three corresponding screws.
––––
Chapter 4 Liftgate Installation
