Chapter 4 Liftgate Installation
23
Copper terminal Link
(10099500) connected
direct to Battery Post
and Circuit Breaker
Positive (Red)
Battery Cable from
liftgate
Ground (Black)
Cable from liftgate
Apply a generous
amount of Dielectric
Grease to all Battery
terminals and Circuit
Breaker terminals.
NOTE:
Circuit Breaker is to rest
solidly on the battery to
prevent vibration during
transit.
150 Amp
Circuit
Breaker
Battery Box
INSTALL TERMINALS TO BATTERY
Connect the end of the
Positive
battery cable from the
liftgate to the circuit breaker as shown.
Connect the end of the negative battery cable from the
liftgate to the negative post of the battery as shown
Apply a generous amount of Dielectric Grease to
all Positive (Hot) Battery terminals and Circuit
Breaker terminals.
Secure all battery cables to the vehicle frame with the
cable ties
every 24 inches
.
Protect wires from any sharp edges or
holes that may abrade insulated
covering of wires.
Secure battery cable so it does not
come near, or in contact with, other
vehicle wiring, fuel lines, brake lines,
air hoses, exhaust system, etc.
