Chapter 4 Liftgate Installation
15
GR00065
MOUNT PLATES BOLTED
INSTALL ENDPLATE
Bolt mount plates to chassis frame and install endplates
onto mount plates.
Using 1/2” bolts and square washers, bolt mount plates
to vehicle chassis frame.
Install endplates as shown with provided nuts and
washers and torque to 85 ft. lbs.
Note
: Do not install any more bolts or weld mount plates
to chassis frame at this time.
GR00066
Re-attach lift cylinders to lift arms.
Unbolt lift arms from mounting jig, and lower arms to
ground.
Reinstall lift cylinder pins and locking nuts.
Remove mounting jig from rear sill.
