Chapter 4 Liftgate Installation
12
GR00499
Note
: For vehicles with swing doors, refer to section in
back of manual “For Vehicles with Swing Doors”.
Locate and tack-weld the mounting jig to rear sill of
body.
Align the centerline marks of the jig with mark on sill.
Verify the 1-3/8” and 3-1/8” dimensions.
GR00060
Note
: The outer two cylinders are the tilt cylinders.
Do not remove any pins from mount frame.
Remove the temporary shipping pins from the tilt
cylinders and lift arms.
Remove the lock nuts and pins from the lift cylinders
and lift arms.
Disconnect all four (4) cylinders from the lift arms.
MOUNT LIFTGATE TO MOUNTING JIG
