3. Cut the Top & Side Double Rails, Top & Side Rubber Seals, and Top & Side Air Foils at 45
°
angles as shown.
4. With the Platform open, position the Side Double Rails against the outer side of the Locking Lug
as shown below. Use Pop Rivets or Counter-Sunk Screws to attach the Double Rails to the
vehicle corner post.
NOTE:
In some cases the width of the body requires that the Double Rails
be notched Around the Locking Lugs due to lack of space.
Double Rails to be installed
with Pop Rivets or Counter-
Sunk Screws
Locking Lug
Corner Post
Rail & Rubber Sill
Rear Sill
Side Double Rail
NOTE
Curb
Side
Shown;
Driver’s Side Opposite
Fig. 2
Fig. 3
X
50
