4
2
IMPORTANT
All of the following items are to be checked and verified before installation is complete.
A. All welds are properly done.
B. All bolts, nuts, and screws are tight and torqued to the proper specification.
C. Control boxes and shut off switch function properly.
D. All phases of the liftgate’s operation work properly.
E. Platform raises level to the truck bed and the gap between the platform and sill
extension is the correct distance.
F. All decals are accounted for and legible.
G. Lights are installed and operate properly.
H. Vehicle meets all state and federal standards.
I. Owner’s Manual is in the vehicle.
J. Pump reservoir is full of oil.
K. All grease fittings are lubricated.
L. All hydraulic connections are tight.
M. Up stops, Drive-Over Bars, Rubber Stops and Platform Bridge are installed and operate
properly. (if applicable)
N. Pump and Motor Slide tray is tightly latched.
O. Liftgate has been operated through its entire operational cycle several times and
operates evenly, freely and smoothly throughout the entire operating cycle with no
unusual noise or vibration.
Do not use liftgate if any of the above are not
checked and verified. If you have any questions not
covered in this manual, contact your nearest Waltco
distributor, or the nearest Waltco factory.
Chapter 7 Final Inspection List
