WAGO 750-363/0040-0000 Manual Download Page 66

Page: 66 / 254

66 Device Description

WAGO-I/O-SYSTEM 750

750-363/0040-0000 FC EtherNet/IP G4 ECO XTR

Manual

Version 1.0.0

4.6

Approvals

More information about approvals.

Detailed references to the approvals are listed in the document “Overview

Approvals

WAGO I/O SYSTEM 750

”, which you can find via the internet under:

www.wago.com



DOWNLOADS



Documentation



System Description.

The following approvals have been granted to 750-363/0040-0000 fieldbus

coupler/controller:

Conformity Marking

Ordinary

Locations

UL61010-2-201

Korea Certification

MSIP-REM-W43-PFC750

The following Ex approvals have been granted to 750-363/0040-0000 fieldbus

coupler/controller:

Hazardous Locations UL121201

Cl I, Div 2, Group A, B, C, D, T4

The following ship approvals have been granted to 750-363/0040-0000 fieldbus

coupler/controller:

DNV GL

[Temperature: D, Humidity: B, Vibration: B, EMC: B, Enclosure: A]

Summary of Contents for 750-363/0040-0000































































































































































































































































Search results

Summary of Contents for 750-363/0040-0000

Reviews:

Brands by name

Popular brands

WAGO 750-363/0040-0000, Manual

Search results

Summary of Contents for 750-363/0040-0000

Reviews:

Brands by name

Popular brands