WAGO 750-363/0040-0000 Manual Download Page 117

Page: 117 / 254

WAGO-I/O-SYSTEM 750 Configuring via the Web-Based Management System (WBM) 117

750-363/0040-0000 FC EtherNet/IP G4 ECO XTR

Manual

Version 1.0.0

)

The following default groups exist:

User: admin

Password: wago

User: user

Password: user

User: guest

Password: guest

SSL Certificates

Entry

Button

Status

(Example)

Description

Server certificate

incl. private key

[Durchsuchen

…]

D:\xyz.crt

Select the file with the server certificate and

user key for secure Web server

communication (HTTPS protocol).

The server certificate must be in *pem, *.cer

or *.crt format and contain the private key of

the device.

[UPLOAD]

NO FILE

Load the selected SSL certificate onto the

device.

Root certificate

(CA)

[Durchsuchen

…]

D:\abc.pem

Select the file with the SSL root certificate.

The root certificate must be in *pem, *.cer or

*.crt format.

[UPLOAD]

NO FILE

Load the selected SSL root certificate onto

the device.

Upload and

installation status

Ready

Download and install status indicator

Button

Description

[INSTALL]

Installs the SSL server and/or root certificate previously

loaded on the device and replaces the existing SSL

certificates.

[DOWNLOAD]

Downloads the SSL root certificate stored in the device to the

local PC.

[SOFTWARE RESET]

Restart the software.

Summary of Contents for 750-363/0040-0000































































































































































































































































Search results

Summary of Contents for 750-363/0040-0000

Reviews:

Brands by name

Popular brands

WAGO 750-363/0040-0000, Manual

Search results

Summary of Contents for 750-363/0040-0000

Reviews:

Brands by name

Popular brands