WAGO 750-363/0040-0000 Manual Download Page 133

Page: 133 / 254

WAGO-I/O-SYSTEM 750 Configuring via the Web-Based Management System (WBM) 133

750-363/0040-0000 FC EtherNet/IP G4 ECO XTR

Manual

Version 1.0.0

Assembly-Information
Entry

Example

Description

Instance

104

Number of the assembly instance

provided by the device.

Description

„AI data, DI data, status and …“ Description of the content of the

assembly instance.

Size [byte]

Byte length of the assembly

instance.

I/O Mapping
Entry

Example

Description

Slot

Slot number of the I/O module on

the local bus.

Order Number

750-465

Order number of the I/O module.

Input Range [byte]

8 - 12

Address range of the I/O module

within the input process data (e.g.,

Assembly instance 104).

Output Range [byte]

Address range of the I / O module

within the output process data (e.g.,

Assembly instance 101).

Summary of Contents for 750-363/0040-0000































































































































































































































































Search results

Summary of Contents for 750-363/0040-0000

Reviews:

Brands by name

Popular brands

WAGO 750-363/0040-0000, Manual

Search results

Summary of Contents for 750-363/0040-0000

Reviews:

Brands by name

Popular brands