WAGO 750-363/0040-0000 Manual Download Page 112

Page: 112 / 254

112 Configuring via the Web-Based Management System (WBM) WAGO-I/O-SYSTEM 750

750-363/0040-0000 FC EtherNet/IP G4 ECO XTR

Manual

Version 1.0.0

Configuring via the Web-Based Management

System (WBM)

An integrated Web server can be used for configuration and administration of the

device. The HTML pages together, they are referred to as the Web-based

Management System (WBM).

The WBM pages saved internally provide current information about the

configuration and status of the device.

The configuration of the device can be changed via the special configuration

pages. Authentication is required for this.

Also HTML pages created by yourself can be save via the implemented file

system.

After changes to the configuration, a restart may be necessary!

In order for changed configuration settings to take effect, it may be necessary for

you to perform a system restart after your changes. This is then indicated in the

description text on the respective WBM pages.

9.1

WBM User Groups

For authentication, 3 different password-protected user authorization groups are

provided as standard:

Table 41: WBM User Groups

User Group

Default Password Access Rights

admin

wago

Read/write access to all WBM pages as

well as passwords modification and

CODESYS application download, if this

is enabled for CODESYS (WBM page

"Administration"> "Security Settings">

"Enable CODESYS port authentication")

user

Read/write access to all WBM pages,

but no write authorization on WBM-page

"Administration"

guest

Read only

Summary of Contents for 750-363/0040-0000































































































































































































































































Search results

Summary of Contents for 750-363/0040-0000

Reviews:

Brands by name

Popular brands

WAGO 750-363/0040-0000, Manual

Search results

Summary of Contents for 750-363/0040-0000

Reviews:

Brands by name

Popular brands