WAGO 750-363/0040-0000 Manual Download Page 226

Page: 226 / 254

226 Appendix

WAGO-I/O-SYSTEM 750

750-363/0040-0000 FC EtherNet/IP G4 ECO XTR

Manual

Version 1.0.0

Appendix

14.1 MIB II Groups

14.1.1 System Group

The system group contains general information about the coupler/controller.

Table 202: MIB II – System Group

Identifier

Entry

Access Description

1.3.6.1.2.1.1.1

sysDescr

This entry contains the device identification. The

object has a fixed code (e.g., "WAGO 750-841")

1.3.6.1.2.1.1.2

sysObjectID

This entry contains the manufacturer's authorization

identification.

1.3.6.1.2.1.1.3

sysUpTime

This entry contains the time (in hundredths of a

second) since the management unit has been last

reset.

1.3.6.1.2.1.1.4

sysContakt

R/W This entry contains the identification and contact

information for the system contact person.

1.3.6.1.2.1.1.5

sysName

R/W This entry contains the administration-assigned

device name.

1.3.6.1.2.1.1.6

sysLocation

R/W This entry contains the node’s physical location.

1.3.6.1.2.1.1.7

sysServices

This entry designates the quantity of services that this

coupler/controller contains.

Summary of Contents for 750-363/0040-0000































































































































































































































































Search results

Summary of Contents for 750-363/0040-0000

Reviews:

Brands by name

Popular brands

WAGO 750-363/0040-0000, Manual

Search results

Summary of Contents for 750-363/0040-0000

Reviews:

Brands by name

Popular brands