56
To remove Three-Point Seat Belt
Press the red button on the buckle to release
the tongue through the effect of a spring.
Shor ten it with your hands to its initial
position so that the automatic retractor may
pull in the seat belt more easily.
Two-Point Automatic Seat Belts
The locks in this type of seat belt operate in
the same way as in three-point seat belts.
For safety reasons, the abdominal seat belt
shall always be inserted into its respective
buckle when it is not being used.
Retractable glass support
IMPORTANT: The tongue must
be inser ted into its correct buckle, if
not, the protection efficiency may be
compromsed.
NOTE: The abdominal seat belt shall run over the pelvic region and not
over the abdomen and shall always be well attached to the body. If necessary,
re-tighten the seat belt strap.
To Shorten the Seat Belt
Just pull it through its free end.
The excessive length portion shall be tied through the plastic ring.
To Lengthen the Seat Belt
Keep the tongue in a straight angle in relation
to the seat belt strap and pull it until you
reach the desired length.
IMPORTANT: Wearing the seat belt
is obligatory. Bus drivers are required by law
to instruct passengers to wear their seat
belts and warn them of the consequences of non-observance of the recommended
preventive measures.
Glass Support
The seat belt shall fit across the mid-
shoulder (never across the neck) and shall by well attached to the body. The seat
belt shall always be well stretched across the hips. If necessary, re-tighten it a
little. Always make sure the seat belts are correctly fitted. Incorrectly positioned
seat belt may cause injuries in case of an accident.