VMware CONVERTER STANDALONE 4.3, User Manual

Page: 39 / 96

Procedure
1 To start the Converter Standalone installer, do one of the following:
n
Go to the folder that contains the installer file and double-click the
VMware-converter-4.x.x-
<xxxxx>.exe
file, where
<xxxxx>
is the number of the build. Check the number of the build to see if it
matches the build you installed.
n
Select Add or Remove Programs from the Control Panel, select Converter Standalone from the list,
and click Change.
2 On the Welcome page of the installer wizard, click Next.
3 On the Program Maintenance page, select Remove and click Next.
4 On the Ready to Remove page, click Remove.
5 On the Installation Completed page, click Finish.
A prompt might ask you to restart your system.
Connect to a Remote Converter Standalone Server
You can use the Converter Standalone client to connect to a Converter Standalone server installed on a remote
machine.
Prerequisites
Ensure that the Converter Standalone server and agent are installed on the remote machine.
Procedure
1 Start Converter Standalone.
2 Follow the procedure that is applicable for your installation type.
Option Action
Local installation
a Select Administration > Connect to another server.
b On the Converter Standalone login page, select Enter the IP address or
host name of the Converter Standalone server.
c Provide the IP address and Administrator credentials, and click Login.
Client-server installation with
remote access
a On the Converter Standalone login page, select Enter the IP address or
host name of the Converter Standalone server.
b Provide the IP address and Administrator credentials, and click Login.
What to do next
You can now use the remote Converter Standalone server to set up and manage conversion tasks.
Chapter 3 Installing and Uninstalling Converter Standalone
VMware, Inc. 39