Vitek VT-2431, Manual Instruction, Page: 7 / 36

7
ENGLISH
•
If an excessive amount of scale builds up in
the steam chamber, the indicator (13) and
indicator (12)
on the control panel will
light up on the body of the steam station.
Cleaning the filter (17)
•
Switch the iron off and let it cool down
completely.
•
When the iron soleplate (1) cools down
completely, remove the iron from the stand (19).
•
Prepare 500 ml of a 10% water solution of
non-iodized table salt.
•
Remove the filter (17) from the stand (19) of
the steam station and remove the remaining
water. (Shake the filter to remove the
remaining water).
•
Put the filter into the container with the prepared
solution and wait until it is filled (pic. 1).
•
To saturate with sodium ions, leave the
solution in the filter for 1-2 hours.
•
Remove the filter from the container and wash
it with clean water.
•
Repeat the procedure 4-5 times.
•
Insert the filter back to its place.
STORAGE
•
Before you take the unit away for storage,
make sure that unit has cooled down
completely.
•
Drain the remaining water from the water tank
(23).
•
Perform a cleaning of the unit.
•
Place the iron on the stand (19) and lock it
with the lock (20) by pressing on the blocking
device (21).
•
Place the power cord (16) and the steam hose
in the cord storage.
•
Keep the unit in a dry darkened and cool place
out of reach of children and disabled persons.
•
DELIVERY SET
Steam station - 1 pc.
Warranty certificate – 1 pc.
Beaker 500 ml - 1 pc.
Manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Rated input power: 2000-2400 W
Maximum power: 2600 W
Maximum steam generation capacity: up to
140 g/min
Pressure: 4.5 bar
Water tank capacity: 1 L
RECYCLING
For environment protection do not throw out the unit
and the batteries (if included), do not discard the
unit and the batteries with usual household waste
after the service life expiration; apply to specialized
centers for further recycling.
The waste generated during the disposal of the unit
is subject to mandatory collection and consequent
disposal in the prescribed manner.
For further information about recycling of this prod-
uct apply to a local municipal administration, a dis-
posal service or to the shop where you purchased
this product.
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without a pre-
liminary notification due to which insignificant dif-
ferences between the manual and product may be
observed. If the user reveals such differences, please
report them via e-mail
info@vitek.ru
for receipt of an
updated manual.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC Directive
2014/30/EU and to the Low Voltage Directive
2014/35/EU.