Page 8
HDT-1000 User and Technical Manual
Audio Input Levels
To set audio input to MIC or LINE level*, complete the
following steps:
1.
Press the AUDIO 1 MIC/LINE or AUDIO 2 MIC/LINE key
.
The currently selected audio input LED illuminates.
2.
Press AUDIO 1 MIC/LINE or AUDIO 2 MIC/LINE key
again to toggle between MIC or LINE input. The AUDIO
LED illuminates to indicate which audio input was
selected.
3.
Press SAVE to complete.
NOTE
:
The HDT-1000 recalls the most recently
saved audio input setting when it is powered up.
NOTE
:
If the SAVE key is not pressed within 5
seconds of the new setting, the audio input level
returns to the most recently used value and the
selection mode is canceled.
RF Output Power Level
To set the RF Output Power Level, complete the following
steps:
1.
Press the RF HI/LOW key to toggle power level.
2. Press SAVE to complete.
Control Operation Table
Button
Description
RF HI/LOW
Toggle between high and low power output.
▲
Move UP through presets/levels.
▼
Move
DOWN
through presets/levels.
AUDIO 1 MIC/LINE
Press to select Audio 1 to Mic or Line then press SAVE to set.
AUDIO 2 MIC/LINE
Press to select Audio 2 to Mic or Line then press SAVE to set.
PRESET
Press to enter Preset mode. The PRESET LED indicates the current preset. Press
the UP ▲ or DOWN ▼ button to select one of the stored Presets [1 - 16]. Press
SAVE to confirm the new setting.
SAVE
Confirms the new setting.
* Mic Gain can be increased in the Web Browser Control Interface. Select
Presets > Video Settings
from the menu bar to display the
Encoder Settings
screen.
