Vislink HDT-1000 User And Technical Manual Download Page 32

Page: 32 / 62

Page 32

HDT-1000 User and Technical Manual

HDT-1000 Screen:

Livestream

[CONSULT FACTORY]

Menu Path:

System > Livestream

[Go to

www.livestream.com

for more information.]

Username

[Configure

Livestream Tab, Livestream

Account Settings Section]

Enter the

Username

in the field provided. You must have a Livestream

Account.

Password

[Configure

Livestream Tab, Livestream

Account Settings Section]

Enter the

Password

in the field provided. You must have a Livestream

Account.

Channel

[

short name

]

[Configure Livestream Tab,

Livestream Account Settings

Section]

Enter the

Channel

[

short name

] in the field provided. You must have a

Livestream Account.

Verify Login

[Configure

Livestream Tab, Livestream

Account Settings Section]

Unverified Livestream Free Channels are currently limited to 50 concurrent

viewers. Click the

Verify Login

button to request verification from Livestream.

You must comply with Livestream’s terms of use.

Create a Livestream

Account

[free or premium]

[Configure Livestream Tab,

Livestream Account Settings

Section]

Click the link

Create a Livestream Account

[

free or premium

]

to open a

browser window offering that feature. An is Internet connection required.

Automatically Go Live

When Broadcasting

[Configure Livestream Tab,

Livestream Channel Settings

Section]

Click the

Automatically Go Live When Broadcasting

checkbox to setup the

transmitter for going live automatically when the device is turned ON.

Enable Streaming to

Mobile Devices

[Configure

Livestream Tab, Livestream

Channel Settings Section]

Click the

Enable Streaming to Mobile Devices

checkbox to set live

streaming to the iPhone and iPod Touch using Livestream Procaster.

Record My Live Streams

(Configure Livestream Tab,

Livestream Channel Settings

Section)

Click the

Record My Live Streams

checkbox to setup Livestream for

automatic recording of your live broadcasts.

Summary of Contents for HDT-1000































































Search results

Summary of Contents for HDT-1000

Reviews:

Related manuals for HDT-1000

Brands by name

Popular brands

Vislink HDT-1000, User And Technical Manual

Search results

Summary of Contents for HDT-1000

Reviews:

Related manuals for HDT-1000

Brands by name

Popular brands