Visionis VIS-3013, User Manual

Page: 126 / 156

Fingerprint Access Control Terminal User Manual
112
7. Set other parameters for the schedule.
Check-in Not Required
Persons in this schedule do not need to check-in when they come to work.
Check-out Not Required
Persons in this schedule do not need to check-out when they end work.
Scheduled on Holidays
On the holidays, this schedule is still effective and the persons needs to go to work according
to the schedule.
Effective for Overtime
The persons' overtime will be recorded for this schedule.
8. Click Save .
Set Temporary Schedule
You can add a temporary schedule for the person and the person will be assigned with the shift
schedule temporarily. You can also view and edit the temporary schedule details.
Before You Start
Add department and person in Person module. See Person Management for details.
Steps
Note
The temporary schedule has higher priority than department schedule and person schedule.
1. Click Time & Attendance → Shift Schedule to enter the Shift Schedule Management page.
2. Click Temporary Schedule to enter Temporary Schedule page.
3. Select the organization and select the person(s).
4. Click one date or click and drag to select multiple dates for the temporary schedule.
5. Select
Workday or Non-Workday from drop-down list.
If Non-Workday is selected, you need to set the following parameters.
Calculated as
Select normal or overtime level to mark the attendance status for temporary schedule.
Timetable
Select a timetable from drop-down list.
Multiple Shift Schedule
It contains more than one timetables. The person can check in/out in any of the timetables
and the attendance will be effective.
If the multiple shift schedules contains three timetables: 00:00 to 07:00, 08:00 to 15:00 and
16:00 to 23:00. The attendance of the person adopting this multiple shift schedules will be