Fingerprint Access Control Terminal User Manual
37
Note
The attendance status will be valid within the configured schedule. For example, if set the Up
key as check in and the Down key as check out, and set the check in's schedule as Monday
08:00, and check out's schedule as Monday 17:00, the valid person's authentication before
17:00 on Monday will be marked as check in. And the valid person's authentication after 17:00
on Monday will be marked as check out.
5. Press
ESC
and save the settings.
Result
Enter the initial page, the current attendance mode will be displayed on the page. If you do not
select a status, the authentication will be marked as the configured attendance status according to
the schedule. If you press the key on the keypad, and select a status to take attendance, the
authentication will be marked as the selected attendance status.
7.7.4 Disable Attendance Mode
Disable the attendance mode and the system will not display the attendance status on the initial
page.
Move the cursor and select
System
→
Att. Status
to enter the Attendance Status page.
Move the cursor and select
Attendance Mode
and set the attendance mode as
Disable
.
Figure 7-18 Disable Attendance Mode
The attendance status function is disabled, and you will not view or configure the attendance
status on the initial page.
7.8 Time and Attendance Management
Manage department, shift, holiday, schedule, and report.
You can add, edit, delete department/shift/holiday/schedule. You can also export the attendance
Summary of Contents for VIS-3013
Page 2: ......
Page 21: ...Fingerprint Access Control Terminal User Manual 7 Figure 4 1 Terminal Diagram...
Page 156: ......
