Fingerprint Access Control Terminal User Manual
48
Note
The available range is from 1970.01.01 to 2037.12.31.
Time
The displayed time on the device.
DST
Select to enable or disable the DST. When the DST is enabled, you can set the DST bias time,
the start time and the end time.
●
DST Bias: You can select 30min, 60min, 90min and 120min.
●
Start: Set the start time of the DST.
●
End: Set the end time of the DST.
3. Press
ESC
and select
Yes
to save the settings and exit the page.
7.10.2 Manage System Data
Delete the saved event, attendance data, user data, or permission.
Steps
1. Move the cursor and select
System
→
Data
.
2. Press
OK
to enter the Data page.
Figure 7-31 Data Page
3. Select an item and press
OK
to delete.
Delete Event Only
Delete all recorded events in the device.
Delete Attendance Data Only
Delete all attendance data in the device.
Delete User Only
Delete all user data in the device, including the attendance records.
Summary of Contents for VIS-3013
Page 2: ......
Page 21: ...Fingerprint Access Control Terminal User Manual 7 Figure 4 1 Terminal Diagram...
Page 156: ......