Fingerprint Access Control Terminal User Manual
94
8.8 Event Center
You can configure the event of the added resources and set the linkage actions so that when the
event is triggered, the software client can notify the security personnel and record the event
details for checking afterwards.
In the event management page, you can configure access control event. For details about access
control event configuration, refer to
Configure Linkage Actions for Access Control
In the event center, you can view the real-time events and search the historical events. For details,
refer to
and
8.8.1 Enable Receiving Events from Devices
Before the client can receive the event information from the device, you need to arm the device
first.
Steps
1. Click
→
Tool
→
Device Arming Control
open Device Arming Control page.
All the added devices display on this page.
2. In the Operation column, turn on the switch to enable auto-arming, or click
Arm All
to arm all
the devices.
Figure 8-5 Device Arming Control
3. View the arming status of each device in the Arming Status column.
Result
The events of armed device(s) are automatically uploaded to the client when the event is
triggered.
Summary of Contents for VIS-3013
Page 2: ......
Page 21: ...Fingerprint Access Control Terminal User Manual 7 Figure 4 1 Terminal Diagram...
Page 156: ......
