Visionis VIS-3013, User Manual

Page: 84 / 156

Fingerprint Access Control Terminal User Manual
70
8.2.12 Get Person Information from Access Control Device
If the added access control device has been configured with person information (including person
details, fingerprint, and issued card information), you can get the person information from the
device and import them to the client for further operations.
Steps
Note
● If the person name stored in the device is empty, the person name will be filled with the
issued card No. after importing to the client.
● The gender of the persons will be Male by default.
● If the card number or person ID (employee ID) stored on the device already exists in the client
database, the person with this card number or person ID will not be imported to the client.
1. Enter Person module.
2. Select an organization to import the persons.
3. Click
Get from Device .
4. Select the access control device from the drop-down list.
5. Click
Get to start importing the person information to the client.
The person information, including person details, person's fingerprint information (if
configured), and the linked cards (if configured), will be imported to the selected organization.
8.2.13 Move Persons to Another Organization
You can move the added persons to another organization if you need.
Before You Start
● Make sure you have added at least two organizations.
● Make sure you have imported person information.
Steps
1. Enter Person module.
2. Select an organization in the left panel.
The persons under the organization will be displayed in the right panel.
3. Select the person to move.
4. Click
Change Organization .
5. Select the organization to move persons to.
6. Click
OK .