2.
Insert a new LE nozzle
E
(whilst
holding the oil preheater).
Select the nozzle in accordance
with the details on page 13.
!
Please note
Only use nozzles marked
"V"
(on the hexagon) (see
Fig.).
3.
Insert rifling facility
D
as far as
possible. Align ignition electrodes
B
in accordance with the drilled
holes towards the cable entries.
Install the oil burner nozzle cen-
trally in the restrictor.
4.
Secure Allen screw
C
of the rifling
facility. Check nozzle gap "a".
!
Please note
An incorrectly adjusted noz-
zle gap "a" can result in irre-
gular operation of the burner
and even a fault shutdown.
Rated output
kW
12.9/19.3
16.1/23.5
Nozzle gap "a"
(see page 18)
mm
3.0
+0.2/-0.3
1.5
+0.2/-0.3
Further details regarding the individual steps
(cont.)
19
Initial start-up, inspection, maintenance
5692
536
GB
Summary of Contents for Vitoplus 300
