112
The following service functions can be selected:
Service function
Function
See page
"Diagnosis"
Checking operating states, actuators and sensors
"Actuator test"
Checking the actuators
"Code 1"
Configuring the system
"Code 2"
Configuring the system
"Fault history"
Calling up
fault codes
from the fault memory
"Service functions"
*3
■
"Maintenance"
■
Maintenance status
Hours run/days remaining until next maintenance
■
Overview
Display of last 5 services
■
Maintenance reset
Confirmation of commissioning or maintenance carried
out
■
Hours run
Maintenance interval
Setting for hours run until next service
■
"Calibrate O2 probe"
Calibrate O
2
probe
(calibrating Lambda probe)
■
"Fill vacuum module"
Vacuum module
■
Filling the pellet hopper
■
Checking
■
"Run hopper until empty"
Setting the interval for running the pellet hopper until emp-
ty
■
"Changeover unit"
Checking the changeover unit
■
"Standard setting"
Loading the standard setting:
■
All data
■
General
■
Boiler
■
Charging
■
Heating water buffer cylinder
■
Additional boiler
■
All groups
"Terminate service"
Exit service
Calling up the service menu
The service menu can be activated from any menu.
Press the following buttons:
1.
d
+
å
simultaneously for approx. 4 s.
The
"Service"
menu appears.
2.
|
/
~
for the required service function.
Exiting the service menu
You can leave the service menu as follows:
■
By pressing
ä
■
Automatically after 30 minutes
■
Via menu point
"Terminate service"
*3
Other displays may be shown, depending on the system configuration.
Diagnosis and service checks
Service functions
5679249
Diagnosis