90
Calling up code 1
!
Please note
An operating error at the "coding levels" may
result in damage to the boiler and the heating
system.
Follow the instructions in chapter "Codes".
Press the following buttons:
1.
d
+
å
simultaneously for approx. 4 s.
The
"Service"
menu appears.
2.
|
/
~
for
"Code 1"
.
3.
d
to confirm.
4.
|
/
~
for the required group.
5.
d
to confirm.
6.
Ù
/
Ú
for
"Heating"
to select:
"Heating circuit 1"
(HC1),
"Heating
circuit 2"
(HC2),
"Heating circuit 3"
(HC3) or
"Heating circuit 4"
(HC4), if
installed.
7.
|
/
~
for the required coding address
8.
d
to confirm.
9.
|
/
~
for the required value.
10.
d
to confirm.
"Adopted"
appears briefly on the dis-
play.
11.
ä
until the default display is shown.
Overview of coding level 1
The coding addresses are displayed in groups, subject to system configuration:
Service function
See page
"Hardware"
"General"
"Boiler"
"Charging"
"Buffer cylinder"
"Additional heat generator"
"Heating"
"DHW"
"Solar"
Hardware
Coding
Coding in the delivered condition
Possible change
Additional boiler
Additional boil-
er:No
No additional boiler installed
Additional boil-
er:Yes
Additional boiler installed
Buffer
Buffer:No
No heating water buffer cylinder in-
stalled
Buffer:3
Heating water buffer cylinder with
3 buffer temperature sensors
Buffer:4
Heating water buffer cylinder with
4 buffer temperature sensors
Buffer:5
Heating water buffer cylinder with
5 buffer temperature sensors
Codes
Code 1
5679249
Codes