Victaulic VE414MC, Operating And Maintenance Instruction Manual

Page: 42 / 64

TM-VE414/415MC_42 REV_D
TM-VE414/415MC / Operating and Maintenance Instructions Manual
9.
Turn on the main power supply to the tool
(circuit breaker panel, knife switch, etc.).
10.
Set the main power switch to the “ON”
position.
11.
Pull the “EMERGENCY STOP” button on
the control panel to the out position.
12.
Push the “RESET” button.
13. Inspect the hydraulic system for leaks.
14.
Turn off the hydraulic system by pushing
the “EMERGENCY STOP” button on the control
panel.
15. Check the hydraulic oil level. Add oil, as
necessary.
AIR BLEEDING
1.
Fill the hydraulic tank with a recommended
hydraulic oil to approximately
3/4
– 1 " /20 – 25
mm) below the threaded neck of the tank.
2.
Remove the plug from the tee fitting near the
hydraulic cylinder.
3. Install the bleeder tube (supplied with the
tool) hand-tight into the tee fitting.