Victaulic VE414MC, Operating And Maintenance Instruction Manual

Page: 44 / 64

TM-VE414/415MC_44 REV_D
TM-VE414/415MC / Operating and Maintenance Instructions Manual
12. Set the depth stop on the tool to obtain
approximately a 1/4-inch/5-mm gap between the
depth stop and the cylinder.
13. Turn the selector switch to the “NORMAL”
position.
14. Depress the foot switch, and observe the
hydraulic ram’s motion. The hydraulic ram
should move down approximately
1/4
-inch/5-mm
rapidly. Release the foot switch. The hydraulic
ram should return to its full-up position. Repeat
this step several times.
15. If the slide does not move rapidly in the
downward direction, repeat steps 2 – 14.
16. Set the main power switch to the “OFF”
position.
RECOMMENDED LUBRICANTS
BEARING AND SLIDE GREASE
NLGI #2 Summer Grade graphite moly base
(General Purpose EP Lithium Base Grease)
Manufacturer Product
BP Amoco
Energrease LC-EP2
Gulf Oil Corp.
Gulfcrown Grease EP#2
Lubriplate
No. 630-2
Mobil Oil Corp. Mobilux EP2
Pennzoil Products Co. Pennlith EP 712 Lube
Shell Oil Co.
Alvania EP2
Sun Refining
Sun Prestige 742 EP
Texaco Inc.
Multifak EP2
GEAR OIL
Refer to the tag located on the gear reducer.
HYDRAULIC OIL
(High Pressure, Anti-Wear/Anti-Foam Hydraulic
Oil ISO Grade 32)
Manufacturer Product
BP Amoco Energol HLP-HM32
Gulf Oil Corp. Harmony 32 AW
Kendall Refining Co.
Kenoil R&O AW-32
Lubriplate
HO-o
Mobil Oil Corp.
Mobil DTE 24
Pennzoil Products Co. Pennzbell AW32
Shell Oil Co. Tellus 32
Sun Refining
Survis 832
Texaco Inc.
Rando