Victaulic VE414MC, Operating And Maintenance Instruction Manual

Page: 19 / 64

TM-VE414/415MC_19 REV_D
TM-VE414/415MC / Operating and Maintenance Instructions Manual
5. Insert a length of pipe that is the correct size
and thickness onto the lower roll. Ensure that
the pipe end contacts the lower-roll backstop
flange completely.
WARNING
Grooving rolls can crush or
cut fingers and hands.
• Always turn the main
power switch OFF
before making any tool
adjustments, unless
instructed otherwise.
• Loading and unloading pipe will place
your hands close to the rollers. Keep
hands away from the grooving rolls during
operation.
• Never reach inside the pipe end or across
the tool or pipe during operation.
• Always groove pipe in a direction that
rotates away from the operator.
• Never groove pipe that is shorter than
the recommended lengths listed in this
manual.
• Never wear loose clothing, loose gloves,
or anything that can become entangled in
moving parts.
6. Set the main power switch to the “ON”
position.
7. Turn the selector switch to the “JOG” position.
8. Use the safety foot switch to bring the
upper roll down into firm contact with the pipe.
Withdraw your foot from the safety foot switch.
9.
Remove the guard setting pad from its
storage location.