Victaulic VE414MC, Operating And Maintenance Instruction Manual

Page: 21 / 64

TM-VE414/415MC_21 REV_D
TM-VE414/415MC / Operating and Maintenance Instructions Manual
FIGURE 1
1.
Ensure that the proper roll set is on the tool
for the pipe size and material. Rolls are marked
with the pipe size, part number, and they are
color coded for the pipe material (refer to the
“Tool Rating and Roll Selection” section). If the
proper rolls are not on the tool, refer to the “Roll
Changing” section.
2. Loosen the stabilizer’s locking handle. Using
the handwheel, fully retract the stabilizer roller.
3. Insert a length of pipe that is the correct size
and thickness onto the lower roll. Ensure that
the pipe end contacts the lower-roll backstop
flange completely. Remove hands from the pipe.
4. Set the main power switch to the “ON”
position.
5.
Turn the selector switch to the “JOG”
position.