Victaulic VE414MC, Operating And Maintenance Instruction Manual

Page: 6 / 64

TM-VE414/415MC_6 REV_D
TM-VE414/415MC / Operating and Maintenance Instructions Manual
INTRODUCTION
NOTICE
• Drawings and/or pictures in this manual
may be exaggerated for clarity.
• The tool, along with this operating
and maintenance instructions manual,
contains trademarks, copyrights, and/or
patented features that are the exclusive
property of Victaulic Company.
The VE414/415MC Roll Grooving Tool is a
motorized, semi-automatic, hydraulic-feed
tool for roll grooving pipe to receive Victaulic
grooved pipe products. The VE414/415MC tool
is supplied with matched rolls for grooving
2–12-inch/60.3 – 323.9-mm carbon steel pipe
to Original Groove Specifications (OGS) and
14–16-inch/355.6 – 406.4-mm carbon steel pipe
to Advanced Groove Specifications (AGS).
VE414/415MC rolls are marked with the size
and part number, and are color coded to
identify the pipe material. For roll grooving to
other specifications and materials, refer to the
applicable “Tool Rating and Roll Selection”
section. Grooving tools for other specifications,
sizes, and materials must be purchased
separately.
CAUTION
• This tool must be used ONLY for grooving
pipe with specifications that fall within
the designated parameters.
• Verify that the upper and lower grooving
rolls are a matched set.
Failure to follow these instructions could
damage the tool and cause product failure,
resulting in property damage or personal
injury.
RECEIVING THE TOOL
VE414/415MC tools are palletized individually
and enclosed in a wooden or cardboard sleeve.
The stabilizer assembly and additional roll sets
are shipped in a separate container. Save the
original packaging for return shipment of rental
tools.
Upon receipt of the tool, ensure that all
necessary parts are included. If any parts are
missing, contact Victaulic.
LARGE CONTAINER CONTENTS
Qty. Description
1 VE414MC Pipe Roll Grooving Tool
1
Roll Set for 8–12-inch/219.1–323.9-mm
Steel Pipe - OGS Specifications
1 Pipe Diameter Tape
1 Hydraulic System Bleeder Tube
1 Safety Foot Switch with Detachable Line Cord
2
TM-VE414MC Operating and Maintenance
Instructions Manual
2
RP-VE414MC Repair Parts List
SMALL CONTAINER CONTENTS
Qty. Description
1 Stabilizer Assembly
1
Roll Set for 2–6-inch/60.3–168.3-mm
Steel Pipe - OGS Specifications
1
Roll Set for 14–16-inch/355.6 – 406.4-mm
Steel Pipe - AGS Specifications
NOTE
Support bases for grooving
26-inch/660.0-mm and larger pipe sizes shall
be ordered separately and will be shipped in
separate containers from the tool components
listed on this page.