Viavi OneExpert DSL ONX-580, User Manual

Page: 49 / 282

OneExpert DSL User's Guide
22052280, Rev. 015 April 2019
Chapter 3 Utilities
49
Setting the date and time
The OneExpert has an internal clock that you can set to provide accurate time stamps for
test results.
Go to the
System Settings menu, then select Date and Time . The Date and Time Settings
menu appears.
Set the time
1. Press Time .
2. Turn the dials to select the hour, minutes, and AM or PM. Press OK .
Set the date
1. Press Date .
2. Use the arrows to set the month and year.
3. Select the day on the calendar.
4. Press
Set .
Specify the date format
1. Press Date Format .
2. Select MM/DD/YYYY or DD/MM/YYYY.
Specify the time format
1. Press Time Format .
2. Select 12 Hour or 24 Hour.
Change the time zone
1. Press Time Zone .
2. Select the time zone.
3. If Daylight Savings Time (DST) is used in your area, press the
DST Used checkbox
to enable DST. A check mark will appear indicating that DST is enabled.
Control Time Synchronization
1. Press Time Synchronization .
2. If synchronization is required, select NTP . If synchronization is not needed, select
None .
When enabled, Network Time Protocol (NTP) synchronizes your system clock to a
central time server.