Viavi OneExpert DSL ONX-580, User Manual

Page: 156 / 282

Chapter 9 WiFi Testing
OneExpert DSL User's Guide
22052280, Rev. 015 April 2019 156
Managing WiFi Advisor Devices
This section describes the WFED Management menu which is used to register WiFi Advisor
devices, view device status, and manage firmware updates.
Registering and unregistering devices
After pairing the device(s) with the OneExpert, the device must be registered in the
OneExpert’s WiFi Advisor application.
To register WiFi Advisor devices
1. From the WiFi menu, select WiFi Advisor , access the pull-down tray and select
WFED Management . The Device Management screen appears.
2. Find the desired “WFED300AC” WiFi Advisor device.
3. If no devices are detected, scan and pair the device(s).
• Verify that the WiFi Advisor is on and ready to pair. If it is, the blue
indicator will blink; if not, long press the blue button until the light blinks.
• Press Scan for devices . Any found devices are listed.
4. Enter the device label (A-Z)
5. Repeat steps 2–4 for each WiFi Advisor. The registered devices appear in the
Device Management screen.
To unregister WiFi Advisor devices
1. From the WiFi menu, select WiFi Advisor , access the pull-down tray and select
WFED Management . The Device Management screen appears.
2. Select the WiFi Advisor with the label (or serial number) of your device.
3. In the pop-up menu, select
Unregister Device . A verification screen appears.
4. Do one of the following:
• If you do not wish to unregister the device, press the Back arrow button
(either on the screen or the physical key on the OneExpert).
• Select OK to unregister your device. The device is unregistered and no
longer appears in the Registered Devices list.