Viavi MTS 4000 Base Unit User Manual Download | Manualshive

Page: 5 / 254

background image

User Manual

77000000206 Rev. 007

i

Notice

Every effort was made to ensure that the information in this document
was accurate at the time of printing. However, information is subject to
change without notice, and Viavi reserves the right to provide an
addendum to this document with information not available at the time that
this document was created.

Copyright

© Copyright 2016 Viavi, LLC. All rights reserved. Viavi, Enabling Broad-
band and Optical Innovation, and its logo are trademarks of Viavi, LLC.
All other trademarks and registered trademarks are the property of their
respective owners. No part of this guide may be reproduced or trans-
mitted electronically or otherwise without written permission of the
publisher.

Trademarks

Viavi and MTS/T-BERD 4000 are trademarks or registered trademarks of
Viavi in the United States and/or other countries.

Microsoft, Windows, Windows CE, Windows NT, and Microsoft Internet
Explorer are either trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries.

Netscape Navigator is a trademark or registered trademark of Netscape
Communications Corporation in the United States and other countries.

Ordering

information

This guide is a product of Viavi's Technical Information Development
Department, issued as part of the User Manual.

WEEE Directive

Compliance

Viavi has established processes in compliance with the Waste Electrical
and Electronic Equipment (WEEE) Directive, 2002/96/EC, and the
Battery Directive, 2006/66/EC.

This product, and the batteries used to power the product, should not be
disposed of as unsorted municipal waste and should be collected sepa-
rately and disposed of according to your national regulations. In the
European Union, all equipment and batteries purchased from Viavi after
2005-08-13 can be returned for disposal at the end of its useful life. Viavi
will ensure that all waste equipment and batteries returned are reused,
recycled, or disposed of in an environmentally friendly manner, and in
compliance with all applicable national and international waste legisla-
tion.

«
...
3
4
5
6
7
...
»

Summary of Contents for MTS 4000 Base Unit































































































































































































































































Reviews:

No comments

Related manuals for MTS 4000 Base Unit

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands