Viavi MTS 4000 Base Unit, User Manual

Page: 180 / 254

Chapter 10 Scope
New features available with the P5000 and P5000i Scope
158 User Manual 77000000206 Rev. 007
Test Profile
On the line Profile , select the Profile which will be used for the test of
fiber connector:
– SM-UPC: Pass/Fail criteria for single-mode UPC connectors from
IEC 61300-3-35 standard.
– SM-APC: Pass/Fail criteria for single-mode APC connectors from
IEC 61300-3-35 standard.
– SM_PC: Pass/Fail criteria for single-mode PC connectors from IEC
61300-3-35 standard.
– MM_: Pass/Fail criteria for multimode connectors from IEC 61300-3-
35 standard.
Profiles contain the analysis parameters by which PASS/FAIL criteria are
determined.
Once the line is selected, you can also add a new profile, clicking on the
Add Button (see "Adding a new profile" on page 160 ).
Tip (not available with P5000)
On the line Tip , select the tip set onto the scope to connect fiber for
inspection.
Capture button (not available with P5000)
This parameter allows to select the action of the Quick Capture button
onto the Scope (see
Figure 99 on page 157 ):
Freeze & Test pressing the button will automatically perform a test
of fiber and freeze the result
Fig. 100 Scope Setup (with P5000i)