Viavi MTS 4000 Base Unit User Manual Download

Page: 187 / 254

Chapter 10

Scope

New features available with the P5000 and P5000i Scope

User Manual

77000000206 Rev. 007

165

Generating the report

In mosaïc mode, check the correct test result is selected (framed in
green).

Press the

ILE

button

The menu bar changes

Press the

Report

key

On the edition keypad, enter the name of the pdf file and press

NTER

to validate and start the report generation.

The report generation is completed once the icon

is no more

displayed on the upper banner.

Display of the report

Once the report has been generated:

Press

ILE

hard key

On the right menu keys, press

Load

soft key.

In the

File Explorer

, select the pdf report just created.

Press

Load

Confirm Load

The pdf report displays in the PDF Reader onto the MTS / T-BERD
4000.

NOTE

The pdf report will be saved on the disk, in the directory Scope.

Summary of Contents for MTS 4000 Base Unit































































































































































































































































Search results

Summary of Contents for MTS 4000 Base Unit

Reviews:

Related manuals for MTS 4000 Base Unit

Brands by name

Popular brands

Viavi MTS 4000 Base Unit, User Manual

Search results

Summary of Contents for MTS 4000 Base Unit

Reviews:

Related manuals for MTS 4000 Base Unit

Brands by name

Popular brands