Viavi MTS 4000 Base Unit User Manual Download

Page: 158 / 254

Chapter 9

Ethernet TE Testing

Specifying test settings

136

User Manual

77000000206 Rev. 007

Press the

PPP

soft key, and then specify the settings. The following

table describes the settings.

Gateway
(Static IP mode)

Enter the gateway address.

DNS
(Static IP mode)

Enter the address of the DNS server.

Use Vendor ID
(DHCP mode)

Specify whether the vendor ID is used.

Use Vendor ID
(If Use Vendor ID
is Yes)

Enter the vendor ID.

MAC Setting

Specify whether the MAC is the factory default
or user defined.

VLAN

Specify whether VLANs are used.

VLAN ID

If VLAN is On, specify the VLAN ID.

VLAN Priority

If VLAN is On, specify the VLAN Priority.

Setting

Description

PPP Mode

Select

Client

Server

Client is normally used. Use Server only when
you have a CO unit. This allows a remote
modem to establish a PPP session with the
Product Name/Family Brand.

NOTE:

If you selected “Server” as the PPP

mode, connect only to other devices with the
same service name.

User Name

Enter a valid user name.
This must be a valid user account with an ISP.

Setting

Description

Summary of Contents for MTS 4000 Base Unit































































































































































































































































Search results

Summary of Contents for MTS 4000 Base Unit

Reviews:

Related manuals for MTS 4000 Base Unit

Brands by name

Popular brands

Viavi MTS 4000 Base Unit, User Manual

Search results

Summary of Contents for MTS 4000 Base Unit

Reviews:

Related manuals for MTS 4000 Base Unit

Brands by name

Popular brands