Viavi MTS 4000 Base Unit, User Manual

Page: 161 / 254

Chapter 9 Ethernet TE Testing
Viewing results
User Manual 77000000206 Rev. 007 139
To run a cable test
1 Connect to the line (see “Connecting to the line” on page 138 ).
2 Press the View soft key and then select Cable Test .
The Ethernet Cable Test screen appears.
3 Optional. To change the measurement units, use the Units soft key
and select Feet or Meters.
4 Press the Start Test soft key.
The test runs and then displays the results.
See “Ethernet TE results” on page 139 to learn what your results mean.
Viewing results
After specifying test settings and connecting to the line, you can view
results.
To view results
1 Use the RESULTS key to access the Ethernet tab and view results.
The last viewed result screen appears.
2 To view another result category, do one of the following:
a Press the right or left arrow to cycle through the menus.
b Press the View soft key, and then select a category.
Ethernet TE results
The following result categories are available in the Ethernet TE applica-
tion:
– Ethernet Summary
– Ethernet Cable Test
– Event Log
NOTE:
The Ethernet Cable Test is an optional feature. If your unit is not
equipped with this option, the Cable Test selection will not be avail-
able.