Viavi MTS 4000 Base Unit, User Manual

Page: 181 / 254

Chapter 10 Scope
New features available with the P5000 and P5000i Scope
User Manual 77000000206 Rev. 007 159
Freeze image pressing the button onto the Scope will automatically
freeze the live image.
Auto Center
This parameter allows to select if the scope image must be centered on
screen (select
Yes ) or not (select No ).
File parameters
The File menu allows to enter a file name for saving scope test results.
On the line Filenaming , use the edition keypad, which will display by
clicking on the right arrow key, to enter a specific name for the file. You
can enter manually a name and/or use pre-defined parameters (Fiber Id,
Cable Id, Locations...).
To add a logo to a report generated from test results, select Logo param-
eter and press right direction key to display the file explorer page and
select the image which will be used as logo on the report page (see
“Generating a report” on page 164 ).
Click on menu key Load to validate the selection. The screen returns to
configuration page and displays the file path in the Logo parameter.
Fiber
The Fiber box allows to configure the fiber plugged to the scope.
On the line Fiber Id , enter a name for the fiber using the edition menu
displayed via the right direction key.
On the line Fiber Number , use the numeric keypad, which will display by
clicking on the right arrow key, to enter the fiber number.
On the line Change fiber Nbr , select if the fiber number must be modified
after each results saving:
No : the fiber number is not modified at each saving
Fig. 101 Edition keypad for naming scope file
Predefined
parameters for
naming files