Viavi Apex Enterprise G3-APEX-ENT-32T User Manual Download

Page: 295 / 380

GSP-8P-9T

Chapter 13: GigaStor RAID Wiping and Rebuilding 295

●

Perform a quick format —

Enabled

Click

Finish

After a few seconds, the

drive should now be available to Windows.

You successfully prepared the disk volumes in Windows. Windows can now read

and write to these RAID disk drives.

How to disable the Recycle Bin for RAID

The Windows Recycle Bin holds deleted files that can be restored, but this

consumes valuable disk space. Disable the Recycle Bin for RAID drives to ensure

RAID disk space is never used for this purpose.
To delete

Right-click the

Recycle Bin

on the Windows desktop, and click

Properties

Highlight the

drive, and select

Don't move files to the Recycle Bin.

Remove files immediately when deleted

Click

The Recycle Bin no longer consumes disk space for files deleted from the RAID.

How to create folders for the RAID drives

Create a folder for network data to be stored. By default, the GigaStor Control

Panel saves to a specific directory name on the RAID volumes, so make sure the

folder is available for each volume.
To create folders on your new RAID for the GigaStor appliance to save network

data to, do the following:

Open

This PC

on the Windows desktop.

Navigate to the

drive.

Create a new folder named

Data

Example: D:\Data

You now have folders for the GigaStor to save to. These folder names match the

names given at the factory and—unless you changed the save location—also

match the location saved in the Observer registry keys.

GSP-8P-9T

Sensitive network traffic is stored on your GigaStor. You can permanently delete

this data before sending for maintenance-plan repairs or before decommissioning

an old GigaStor hardware unit.

Prerequisite(s):

These tasks require a hardware appliance GigaStor. These steps cannot be

followed for the GigaStor Software Edition.

In performing a full deletion of the data available on the GigaStor RAID, the

following steps should be completed in the following order across the GigaStor

Control Panel, Windows, and Areca RAID Controller.

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T





























































































































































































































































































































































































Search results

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T

Reviews:

Related manuals for Apex Enterprise G3-APEX-ENT-32T

Brands by name

Popular brands

Viavi Apex Enterprise G3-APEX-ENT-32T, User Manual

Search results

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T

Reviews:

Related manuals for Apex Enterprise G3-APEX-ENT-32T

Brands by name

Popular brands