Viavi Apex Enterprise G3-APEX-ENT-32T, User Manual

Page: 332 / 380

Understanding hardware acceleration
332 GigaStor (23 Feb 2018) — Archive/Non-authoritative version
A probe may have multiple probe instances, which are useful if you need multiple
users using the same probe simultaneously or if you have specific needs for each
probe instance (for instance, packet capture, trending, and so on). When you
connect to a probe, ensure you select the probe instance you need and not one
being used by someone else.
Note: Probe redirection can either be password protected or disabled,
depending on the target probe.
To redirect a probe instance, complete the following steps:
2. Do one of the following:
●
If you see a remote probe instance you want to redirect, skip directly to
step 6 .
●
If your list is empty or missing the remote probe instance you want to
redirect, proceed to step 3 .
3. Click New .
The Edit Remote Probe Entry dialog appears.
4. Type the IP address, or DNS address, of the remote probe.
If you type a DNS name, it resolves to its IP address.
5. If necessary for probe access, type a user name and password, and click OK .
Figure 152: Credentials may be needed