Viavi Apex Enterprise G3-APEX-ENT-32T User Manual Download

Page: 28 / 380

G3-GS-8P-1152T

28 GigaStor (23 Feb 2018) — Archive/Non-authoritative version

14.

In Windows, change the

IP address (page 174)

for the

ETH0

port (shown as

ETH0

Network Connections

in Windows) using information supplied to

you by your network administrator.
The default IP address (

192.168.1.10

) is printed on a sticker attached to the

top of the appliance.

15.

Ensure the time zone settings match your environment.

16.

(Optional) Change the

IPMI port (page 176)

in the BIOS using a static IP

address provided by your network administrator.

17.

(Optional) Change the

JBOD IPMI port

in the BIOS using a static IP address

provided by your network administrator.

18.

Double-click the Observer icon on the Desktop to start Observer.

Your hardware appliance is installed and on your network.
Next, give the

ETH0

IP address and IPMI port address, if using, to the Observer

administrator. They need the addresses to add this GigaStor probe to Observer to

capture network traffic with a probe instance.

G3-GS-8P-1152T

The G3-GS-8P-1152T is best suited for 40 Gb data centers.

G3-GS-8P-1152T technical specifications (page 28)

G3-GS-8P-1152T technical specifications

The technical specifications for the product are shown below.

Figure 13: G3-GS-8P-1152T Front

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T





























































































































































































































































































































































































Search results

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T

Reviews:

Related manuals for Apex Enterprise G3-APEX-ENT-32T

Brands by name

Popular brands

Viavi Apex Enterprise G3-APEX-ENT-32T, User Manual

Search results

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T

Reviews:

Related manuals for Apex Enterprise G3-APEX-ENT-32T

Brands by name

Popular brands