Viavi Apex Enterprise G3-APEX-ENT-32T User Manual Download Page 176

Page: 176 / 380

Configuring the LOM or IPMI port

176 GigaStor (23 Feb 2018) — Archive/Non-authoritative version

its default password

admin

You can change the Administrator account password after logging in. See the

Windows documentation if necessary.

In Windows, choose

Start

Control Panel

Network and Sharing Center

Change adapter settings

The

Network Connections

window appears.

Right-click

OnBoard LAN 2

and choose

Properties

OnBoard LAN 2

is the 10/100/1000 port on the right when viewing the back

of the system.

OnBoard LAN 1

is the Ethernet port on the left and is disabled

by default.

Select

Internet Protocol Version 4 (TCP/IPv4)

, and click

Properties

Set the IP address, subnet mask, router or gateway, and DNS server for your

environment and click

Figure 96: Default TCP/IP settings

Click

again to close the

Properties

dialog for that network connection.

Starting now, all of your interaction with the hardware appliance can now be

done remotely by connecting to the appliance using other Observer Platform

products or Windows Remote Desktop depending on what you want to

accomplish.

Configuring the LOM or IPMI port

Your appliance comes with an on-board LOM or IPMI port that provides you a

dedicated management channel for device maintenance. It allows you to monitor,

start, stop, and manage your appliance remotely regardless of whether the

appliance is powered on.

Prerequisite(s):

♦

A GigaStor system

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T





























































































































































































































































































































































































Search results

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T

Reviews:

Viavi Apex Enterprise G3-APEX-ENT-32T, User Manual, Page: 176 / 380

Search results

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T

Reviews: