Viavi Apex Enterprise G3-APEX-ENT-32T User Manual Download

Page: 168 / 380

VIAVI Rail Kit (Gen3 Edition)

168 GigaStor (23 Feb 2018) — Archive/Non-authoritative version

In Windows, change the

IP address (page 174)

for the

10/100/1000

port

(shown as

OnBoard LAN 2

Network Connections

in Windows) using

information supplied to you by your network administrator.
The default IP address (

192.168.1.10

) is printed on a sticker attached to the

top of the appliance.

10.

Ensure the time zone settings match your environment.

11.

(Optional) Change the

LOM port (page 176)

in the BIOS using a static IP

address provided by your network administrator.

12.

Double-click the Observer icon on the Desktop to start Observer.

Your hardware appliance is installed and on your network.

VIAVI Rail Kit (Gen3 Edition)

The VIAVI rail kit is used with its 2U and 5U 19 inch rack-mounted appliances in

four post L-bracket or U-bracket cabinets.

How to install the rails
How to remove your appliance from the rails (page 170)
How to remove the rails from a cabinet (page 170)
Rail kit hardware (page 171)

How to install the rails

Installation is fast and easy, and no tools are required to install the rails in your

cabinet.

Prerequisite(s):

Ensure you have all of the parts.

Rail kit hardware (page 171)

These steps assume you are at the front of the cabinet when installing. If you

install appliances from the rear of your cabinet, such as for airflow reasons, the

front of the rail must be closest to the face of the appliance for the slide locks to

engage.
Rather than screws, ½ inch (14mm) posts on the rail known as

locking pins

fit

into holes in the cabinet. A plastic tab known as a

rail lock

ensures the rail stays

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T





























































































































































































































































































































































































Search results

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T

Reviews:

Related manuals for Apex Enterprise G3-APEX-ENT-32T

Brands by name

Popular brands

Viavi Apex Enterprise G3-APEX-ENT-32T, User Manual

Search results

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T

Reviews:

Related manuals for Apex Enterprise G3-APEX-ENT-32T

Brands by name

Popular brands