Viavi Apex Enterprise G3-APEX-ENT-32T User Manual Download Page 173

Page: 173 / 380

Installing the drives in your Observer Platform appliance

Chapter 1: Appliance installation 173

Stickers on each drive identify which slot it should be installed in. The drive labeled 1

must be installed in the upper left slot of the appliance.

Make sure that the appliance is turned off.

Locate the drives that comprise the array. The drives are labeled to show

you where they should be installed in the drive cage. (

Image may not exactly

match your product.

)

Figure 93: Appliance front (product may vary)

Gently insert each RAID drive by squeezing the tabs and sliding the drive into

place until the tabs can engage the slots on both sides of the drive. Do not

use force!
Slightly lift the drive tabs to ease insertion.

Figure 94: RAID drive

Repeat until all of the drives are installed as labeled.
You should push each drive slightly to ensure that it is fully seated.

Additionally, you may want to visually inspect all of the drives from the side

to verify that they are all sitting at the same approximate depth. Check any

that are protruding while the system is turned off.

Turn on the system, and check that every RAID activity LED light is lit. If

not, turn off the system, reinsert the corresponding drive into its cage, and

confirm that it clicks into place.

The RAID drives are now in place and you can turn on the appliance.

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T





























































































































































































































































































































































































Search results

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T

Reviews:

Related manuals for Apex Enterprise G3-APEX-ENT-32T

Brands by name

Popular brands

Viavi Apex Enterprise G3-APEX-ENT-32T, User Manual

Search results

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T

Reviews:

Related manuals for Apex Enterprise G3-APEX-ENT-32T

Brands by name

Popular brands