18
1. Please screw the flange of burner (see Fig. no. 14) onto the ash door by means of 3 pcs screws
M10 x 30 (2), 1 pc screw M10 x 50 (2), 4 pcs nuts M10, 4 pcs washers 10,5 and 4 pcs spring washers
10,5.
2. Screw the knee of the burner on the body of burner with the throat directed onto the positioning of the
fuel reservoir.
3. Mount the burner insulation onto the flange of the burner.
4. Screw the burner with insulation to the transitionary flange by means of 2 pcs screws M10 x 50, 2 pcs
nuts M10, 2 pcs washers 10,5 and 2 pcs spring washers 10,5.
Fig. no. 14
The lower door with the flange of burner
Ash door
Transitionary flange for
installation of burner
1.
Screw M10 x 50
2.
Screw M10 x 30
