20
5.3.5 Mounting of the shells
1
Anchor screw
2
Console 1
3
Washer 10,5
4
Nut M10
5
Console 2
6
Right side part of shell
7
Insulation of the side part of shell
8
Connecting pin
9
Washer 6,4
10 Screw M5 x 12
11 Right side part of shell
12 Screw ST 4,2 x 9,5
13 Insulation of the rear part of shell
14 Rear part of shell
15 Upper part of shell
16 Insulation of the upper part of shell
17 Spring clamp
18 Control box
19 Washer 5,3
20 Cable gland PG 9
Fig. no. 16 Mounting of jacketing
1.
Remove shells out of the carton wrapping.
2.
Fitting is carried out according to Fig no. 16
3.
Put the consoles (1) (2) and 2 (5) on the threads of the upper anchor screw (1) (2) and 2 (5) and screw
them by using 2 pcs M10 nuts (4) and 2 pcs 10.5 washers (3)
