Hold
3
-
36
Using Wave Phone Features
Wave Phone User Guide
DIGITAL PHONES
To place a call on hold
Press
HOLD
.
When a call is on hold, the red LED flashes next to the corresponding line or call
appearance key.
You can hang up the handset or use other phone features.
If you leave the call on hold for longer than the system hold time (three minutes is the
default), your phone rings back and
HELD
is displayed.
Note:
The
Flash
key can be used to place calls on temporary hold. However, you cannot
hang up the handset or you will be reconnected to the call on hold.
To reconnect to a call on hold
Press the line or call appearance key that corresponds to the call that was placed on hold.
OR
Press the
TAP
key to retrieve the most recently held call.
Hint:
If more than one call has been placed on hold, press
TAP
, then the
HOLD
key
while not connected to a call will scroll through all calls on hold. When the desired call is
shown on the display, press
TAP
to retrieve that one.
ANALOG PHONES
Place the current call on hold while you use other phone features.
To place a call on hold
With a party on the line:
1.
Press
FLASH
, then #, then
*
64.
2.
Listen for two beeps.
3.
Hang up.
Reconnect to a call on hold
1.
Listen for dial tone.
2.
Press
*
65
,
then
#
.
