Vertical 9112i User Manual Download

Page: 50 / 146

Call Record

Using Wave Phone Features

Wave Phone User Guide

Call Record

Call Record records the currently active call and saves it as a .wav file to a Voicemailbox. The
maximum length of a recording equals the maximum length of a Voicemail message. The

Call

Record

key is a programmed key, contact your system administrator for additional information.

Warning:

In many localities, it is illegal to record a phone call without first notifying the person

or persons being recorded.

Recording a Call [D] / [A]

DIGITAL PHONES

To use Call Record

Notify the person or people with whom you are speaking that you are about to record the
call (see Warning above).

Press

Call Record

To end the recording session

Press

Call Record

again.

Using another phone feature will end a call recording session.

You access the recording in the same way you access Voicemail messages. See “Multiple
Call Handling” on page 3-39 for details.

ANALOG PHONES

To use Call Record

Notify the person or people with whom you are speaking that you are about to record the
call (see Warning above).

Press

Flash

then *16.

To end the recording session

Press

Flash

, then *16 (or hang up to stop recording and end the call).

Summary of Contents for 9112i



















































































































































Search results

Summary of Contents for 9112i

Reviews:

Related manuals for 9112i

Brands by name

Popular brands

Vertical 9112i, User Manual

Search results

Summary of Contents for 9112i

Reviews:

Related manuals for 9112i

Brands by name

Popular brands