Vertical 9112i User Manual Download

Page: 63 / 146

Direct Station Select/Busy Lamp Field

Using Wave Phone Features

Wave Phone User Guide

Direct Station Select/Busy Lamp Field

Direct Station Select/Busy Lamp Field (DSS/BLF) keys allow you to monitor the status of
extensions, to call extensions with one key press, and to easily transfer calls to them.

DSS/BLF

keys are configured by the system administrator or by user programming and can be

configured for blind or supervised transfer.

A solid red LED next to a

DSS/BLF

key

indicates that the line is in use. A flickering red LED

indicates the extension is ringing. A blinking LED indicates that the extension has a call on hold.

Using the DSS/BLF Feature [D]

DIGITAL PHONES

ALLING

XTENSION

Press the

DSS/BLF

key to call the programmed destination extension.

SING

UPERVISED

RANSFER

A supervised transfer allows you to announce a call before completing the transfer.

To make a Supervised Transfer

While connected to another party:

Press the DSS/BLF key for the destination extension.

When the destination party answers, announce the call.

Hang up or press

SPEAKER

to complete the transfer.

To cancel a Supervised Transfer

Press

TAP

to cancel the transfer before completion.

SING

LIND

RANSFER

A blind transfer allows you to transfer a call to another extension with one key press and without
announcing the transfer.

To make a Blind Transfer

While connected to another party:

Press a

DSS/BLF

key.

Hang up or press SPEAKER to complete the transfer

Summary of Contents for 9112i



















































































































































Search results

Summary of Contents for 9112i

Reviews:

Related manuals for 9112i

Brands by name

Popular brands

Vertical 9112i, User Manual

Search results

Summary of Contents for 9112i

Reviews:

Related manuals for 9112i

Brands by name

Popular brands