Vertical 9112i User Manual Download

Page: 53 / 146

Call Waiting

Using Wave Phone Features

Wave Phone User Guide

To disable Call Waiting

Press *70, and dial the phone number.

Call Waiting is disabled for the duration of the call. Call Waiting is re-enabled when the
call is terminated.

DIGITAL PHONES

To accept a call waiting call

Press

Call Waiting

If you do not have a programmed

Call Waiting

key, press

Flash

to answer the call.

The initial call is placed on temporary hold.

Note:

If Call Appearance keys are programmed for a line, additional calls on that line will

appear on those keys. The Call Waiting key will only be utilized if there are no available Call
Appearance keys to associate with the new call. For more information see “Multiple Call
Handling” on page 3-39

To reconnect to the initial call

Press the

TAP

key.

The call waiting call is placed on temporary hold.

You can toggle between the initial call and the call waiting by pressing the

TAP

key. The

display updates to reflect which caller is connected.

To disable Call Waiting

Press

Call Waiting,

or *70, then dial the phone number.

Press

Call Waiting

during an active call.

Call Waiting is disabled for the duration of the call. Call Waiting is re-enabled when the
call is terminated.

ANALOG PHONES

To accept a call waiting call

Press

Flash

to place the current call on hold and connect to the incoming call.

To reconnect to the original call

Press

Flash

, then 3, then follow the prompts.

Summary of Contents for 9112i



















































































































































Search results

Summary of Contents for 9112i

Reviews:

Related manuals for 9112i

Brands by name

Popular brands

Vertical 9112i, User Manual

Search results

Summary of Contents for 9112i

Reviews:

Related manuals for 9112i

Brands by name

Popular brands